|
 |
Model ST-A Liner Hanger Setting Tool
1.Used with Model XGJ, DYX, NDYX, SSX, and NSSX liner hangers.
2.Mechanical release.
3.Plate-style load applying mechanism allows higher slack-off weight.
4.No need to find the neutral point while releasing the setting tool.
5.The setting tool can be easily released by slacking off certain weight and using right hand rotation.
6.Retrievable Pack-off Bushing can be retrieved with setting tool, eliminating drill-out.
|
 |
Model ST-CF Liner Hanger Setting Tool
1.Used with liner hangers assembled with a liner top packer.
2.Model ST-CF setting tool incorporates a packer setting sub on the model ST-A setting tool.
3.The liner top packer is set mechanically by compression weight.
|
 |
Model STY-A Hydraulic Release Setting Tool
1.Model STY-A Hydraulic Release Setting Tool
2.Primary hydraulic release and secondary mechanical release.
3.Allows liner rotation.
|
 |
Model QD-A Hold-down Sub
1.Can be used with all hydraulic liner hangers.
2.Can be hydraulically locked and mechanically unlocked. Used for light weight liner.
3.Improves the success rate of setting tool release.
|
 |
Landing collar with ball seat
1.Can be used with all hydraulic liner hangers.
2.After the liner wiper plug latches into the landing collar, sealing is established and holds back pressure.
3.Good resistance to erosion allows long time and large flow rate circulation.
4.All internal parts are made of easily-drillable materials.
|
 |
Model XJS Pump Down Plug
1.Used for the cement displacement in drillpipes.
2.Bonded type wiper fins improve fluid isolation and wiping performance.
3.Combination of different sized wiper fins can satisfy the usage of tapered drill string.
4.Effective seal and locking is achieved after latching into the liner wiper plug.
|
Copyright(C) Shelfoil Petroleum Equipment & Services Co., Ltd.
Address: #1286, Changxing Road, Economic Development Zone, Dezhou, Shandong, China
Tel: +86-534-2670699 Fax: +86-534-2566056 E-mail:info.sripe@sinopec.com
